Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses. The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces. Water or solvents can be used, depending on the type of contamination and the workpiece. Contaminants can include dust, dirt, oil, pigments, rust, grease, algae, fungus, bacteria, lime scale, polishing compounds, flux agents, fingerprints, soot wax and mold release agents, biological soil like blood, and so on. Ultrasonic cleaning can be used for a wide range of workpiece shapes, sizes and materials, and may not require the part to be disassembled prior to cleaning.
Objects must not be allowed to rest on the bottom of the device during the cleaning process, because that will prevent cavitation from taking place on the part of the object not in contact with solvent.
Features:
1. Proprietary MCU-sweep ultrasonic wave generator driver circuit to present uniform and strong cleaning performance and to minimize noise level.
2.Proprietary industrial ultrasonic transducer with high Q value and energy conversion efficiency at stable output.
3. Imported high-strength adhesive, staple-free bonding, and long service life of tank
4. Digital timing for heating control between 1-99 minutes and temperature setting between 1-80℃.
5. Internal tank fabricated of 1.0mm SUS304 stainless steel to present good performance and long service life.
6. Cleaning basket made of 304 stainless steel and electro-polished.
7. Outer shell made of high-quality stainless steel to present good corrosion resistance.
Specification
|
Name
|
Ultrasound Cleaning Machine
|
Voltage
|
● AC110-120V 60Hz
● AC220-240V 50Hz
|
|
Model
|
UC-8600
|
Power
|
600W
|
|
Packing size
|
657*452*475mm
|
Ultrasonic frequency
|
53/68/80/100/132KHz
|
|
Internal groove size
|
500*300*200mm
|
Time setting
|
1-99mins
|
|
Tank capacity
|
30L
|
Net weight
|
16KG
|
Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses. The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces. Water or solvents can be used, depending on the type of contamination and the workpiece. Contaminants can include dust, dirt, oil, pigments, rust, grease, algae, fungus, bacteria, lime scale, polishing compounds, flux agents, fingerprints, soot wax and mold release agents, biological soil like blood, and so on. Ultrasonic cleaning can be used for a wide range of workpiece shapes, sizes and materials, and may not require the part to be disassembled prior to cleaning.
Objects must not be allowed to rest on the bottom of the device during the cleaning process, because that will prevent cavitation from taking place on the part of the object not in contact with solvent.
Features:
1. Proprietary MCU-sweep ultrasonic wave generator driver circuit to present uniform and strong cleaning performance and to minimize noise level.
2.Proprietary industrial ultrasonic transducer with high Q value and energy conversion efficiency at stable output.
3. Imported high-strength adhesive, staple-free bonding, and long service life of tank
4. Digital timing for heating control between 1-99 minutes and temperature setting between 1-80℃.
5. Internal tank fabricated of 1.0mm SUS304 stainless steel to present good performance and long service life.
6. Cleaning basket made of 304 stainless steel and electro-polished.
7. Outer shell made of high-quality stainless steel to present good corrosion resistance.
